Micro Switch Usage Instructions
June 07, 2022
Micro switch common matters, micro switch usage instructions, micro switch installation knowledge, micro switch connection answer, micro switch wire analysis, micro switch welding analysis micro switch common matters, micro switch usage instructions, micro Dynamic switch mounting knowledge, micro switch wiring solution, micro switch wire analysis, micro switch welding analysis
★To ensure safety, please be sure to observe the following items.
● When installing, disassembling, wiring, and maintenance inspection of the installation switch, be sure to turn the power off. Doing so may cause electric shock or burnout.
●About wiring work • Do not perform wiring work while the switch is energized. Also, do not touch the live parts of the terminals while power is on. Doing so may cause electric shock.
• Wiring and soldering work should be done according to [correct usage method]. If the wiring or soldering is poor, it may be burnt due to abnormal heat during power-on.
● For the contact load, select the appropriate switch rating based on the contact load. If a current exceeding the contact load is applied to the contact point, the joint may be welded and moved, which may cause short circuit and burnout.
●About the type of load The constant current and surge current may vary greatly depending on the type of load. Please select the appropriate rated switch according to the type of load. The larger the inrush current when the circuit is closed, the larger the consumption and the amount of movement of the contact, which may cause the joint to be welded, moved, and may cause short circuit or burnout.
● Regarding the use environment, please do not use the switch in an environment such as flammable gas or explosive gas. Due to the arc generated during switching and the heat generated by the switch, it may cause a fire or explosion.
● Regarding the impact on the individual switch, please do not drop or disconnect the switch. Otherwise, not only can it not satisfy its characteristics, but it may also cause damage, electric shock, and burnout.
●About durability (life)
The durability (life) of the switch varies greatly depending on the switching conditions. When using, be sure to confirm the actual equipment in actual use conditions and use it within the range of switching times allowed by performance. If it continues to be used in a state where the performance is degraded, it may eventually cause poor insulation, joint welding, poor contact, and damage and burning of the switch itself.
